Hyundai Accent 2001 Owner's Manual page 54

To remove the frost or exterior fog on the
windshield:
o Set the air intake control to the fresh (
position.
o Set the air flow control to the defrost (
position. (The A/C will be on automatically.)
o Set the temperature control to the warm.
o Set the fan speed control to position "3" or
"4".
B730A01A-AAT
OPERATION TIPS
o To keep dust or unpleasant fumes from
entering the car through the ventilation sys-
tem, temporarily set the air intake control at
the position.
Be sure to return the control to the
position when the irritation has passed to
keep fresh air in the vehicle. This will help
keep the driver alert and comfortable.
o Air for the heating/cooling system is drawn
in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.
FEATURES OF YOUR HYUNDAI
B740A01A-AAT
AIR CONDITIONING SWITCH
)
(If Installed)
)
The air conditioning is turned on by pushing the
A/C button on the heating/air conditioning con-
trol panel.
B740B02A-AAT
AIR CONDITIONING OPERATION
(If Installed)
Cooling
AX11060A-1
To use the air conditioning to cool the interior:
o Turn on the fan control switch.
o Turn on the air conditioning switch by push-
ing in on the switch.
The air conditioning indicator light should
come on at the same time.
o Set the air intake control to the
o Set the temperature control to "Cool". ("Cool"
provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)
o Adjust the fan control to the desired speed.
For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the
control.
AX11060G-1
position.
position on the air intake
1- 45