Hyundai Accent 2001 Owner's Manual page 53

o Set the air intake control to the fresh air
( ) position.
o Set the air flow control at the bi-level
( ) position.
o Set the temperature control between "Cool"
and "Warm".
B710A01A-AAT
VENTILATION
To operate the ventilation system:
o Set the air intake control at the fresh air
( ) position.
o To direct all intake air to the dashboard
vents, set the airflow control to the face
( ) position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
1- 44
FEATURES OF YOUR HYUNDAI
B710B01A-AAT
CENTER VENTILATOR
The center ventilators are located in the middle
of the dashboard.
To change the direction of the airflow, turn the
control knob on the middle of the ventilator as
desired.
B710C01A-AAT
AX11060D-1
SIDE VENTILATOR
The side ventilators are located on each side of
the dashboard. To change the direction of the
air flow, turn the control knob on the middle of
the side ventilator as desired.
B720A03A-AAT
DEFROSTING/DEFOGGING
AX10970A
Use the heating/ventilation system to defrost or
defog the windshield:
To remove the interior fog on the wind-
shield:
o Set the air intake control to the fresh air
( ) position.
o Set the air flow control to the defrost (
position.(The A/C will be on automatically.)
o Set the temperature control at the desired
position.
o Set the fan speed control between "1" and
"4" position.
AX10980A
AX11060B-1
)