Hyundai Accent 2001 Owner's Manual page 24

B230C02A-AAT
INSTALLING A CHILD RESTRAINT
SEAT (4 Door)
Rear seat package tray
Anchorages
Tether strap hook
Front of Vehicle
Three child restraint hook holders are located
on the rear seat package tray. To install the
child restraint seat, connect the child restraint
tether strap hook to the child restraint hook
holder and tighten to secure the seat.
FEATURES OF YOUR HYUNDAI
B230E02A-AAT
INSTALLING A CHILD RESTRAINT
SEAT (3 Door)
Covering shelf
Tether strap hook
Back panel
Front of Vehicle
YR10380B
Three child restraint hook holders are located
on the vertical back panel.
To install the child restraint seat, remove the
blanking covers on the covering shelf.
And, connect the child restraint tether strap
hook to the child restraint hook holder through
the hole on the covering shelf.
B230F01A-AAT
Installation on Rear Seat Center Posi-
tion
On center rear seat
Blanking covers
Use the center seat belt for the rear seat to
secure the child restraint system as illustrated.
After installation of the child restraint system,
rock the child seat back and forth, and side to
side to ensure that it is properly secured by the
seat belt.
If the child seat moves, readjust the length of
the seat belt. Then, if equipped, insert the child
restraint tether strap hook into the child restraint
hook holder and tighten to secure the seat.
Always refer to the child restraint system
B230E02A
manufacturer's recommendation before install-
ing the child restraint system in your vehicle.
B230F01A.WMF
1- 15