Hyundai Accent 2001 Owner's Manual page 101

F070E04A-AAT
o Automatic Transaxle Fluid o Automatic Transaxle Fluid o Automatic Transaxle Fluid o Automatic Transaxle Fluid o Automatic Transaxle Fluid
The fluid level should be in the "HOT" range of
the dipstick, after the engine and transaxle are
at normal operating temperature. Check the
automatic transaxle fluid level with the engine
running and the transaxle in neutral, with the
parking brake properly applied. Use DIAMOND
ATF SP-III or SK ATF SP-III when adding or
changing fluid.
F070G02A-AAT
o o o o o Brake fluid Brake fluid Brake fluid Brake fluid
Brake fluid
Check brake fluid level in the brake fluid reser-
voir. The level should be between "MIN" and
"MAX" marks on the side of the reservoir. Use
only hydraulic brake fluid conforming to DOT 3
or DOT 4.
F070F01A-AAT
o o o o o Brake hoses and lines Brake hoses and lines Brake hoses and lines Brake hoses and lines
Brake hoses and lines
Visually check for proper installation, chafing,
cracks, deterioration and any leakage. Replace
any deteriorated or damaged parts immediate-
ly.
F070H01A-AAT
o o o o o Rear brake drums/linings, parking Rear brake drums/linings, parking Rear brake drums/linings, parking Rear brake drums/linings, parking
Rear brake drums/linings, parking
brake brake brake brake brake
Check the rear brake drums and linings for
scoring, burning, leaking fluid, broken parts,
and excessive wear. Inspect the parking brake
VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
system including the parking brake lever and
cables. For detailed service procedures, refer
to the Shop Manual.
F070J01A-AAT
o o o o o Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors
Check the pads for excessive wear, discs for
run out and wear, and calipers for fluid leakage.
F070K01A-AAT
o o o o o Exhaust pipe and muffler Exhaust pipe and muffler Exhaust pipe and muffler
Exhaust pipe and muffler Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and
hangers for cracks, deterioration, or damage.
Start the engine and listen carefully for any
exhaust gas leakage. Tighten connections or
replace parts as necessary.
F070L01A-AAT
o o o o o Suspension mounting bolts Suspension mounting bolts Suspension mounting bolts
Suspension mounting bolts Suspension mounting bolts
Check the suspension connections for loose-
ness or damage. Retighten to the specified
torque.
F070M01A-AAT
o o o o o Steering gear box, linkage & boots/ Steering gear box, linkage & boots/ Steering gear box, linkage & boots/
Steering gear box, linkage & boots/ Steering gear box, linkage & boots/
lower lower lower lower arm ball joint lower arm ball joint arm ball joint arm ball joint arm ball joint
With the vehicle stopped and engine off, check
for excessive free-play in the steering wheel.
Check the linkage for bends or damage. Check
the dust boots and ball joints for deterioration,
cracks, or damage. Replace any damaged parts.
F070N01A-AAT
o o o o o Power steering pump, belt and hos- Power steering pump, belt and hos- Power steering pump, belt and hos-
Power steering pump, belt and hos- Power steering pump, belt and hos-
es es es es es
Check the power steering pump and hoses for
leakage and damage. Replace any damaged or
leaking parts immediately. Inspect the power
steering belt for evidence of cuts, cracks, ex-
cessive wear, oiliness and proper tension. Re-
place or adjust it if necessary.
F070P01A-AAT
o o o o o Driveshafts and boots Driveshafts and boots Driveshafts and boots Driveshafts and boots Driveshafts and boots
Check the drive shafts, boots and clamps for
cracks, deterioration, or damage. Replace any
damaged parts and, if necessary, repack the
grease.
F070Q01A-AAT
o o o o o Air conditioning refrigerant Air conditioning refrigerant Air conditioning refrigerant Air conditioning refrigerant
Air conditioning refrigerant
Check the air conditioning lines and connec-
tions for leakage and damage. Check air condi-
tioning performance according to the relevant
shop manual if necessary.
5-7