Epson Equity 386SX User Manual page 48

To enter a password, type any combination of characters
(including letters, numbers, and blank spaces) up to a total
of seven characters. Use the backspace key to delete
mistakes.
Do not use characters requiring the
@, or *, in your password. The Equity 386SX does not
recognize the
access the system.
WARNING
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you cannot remember
the password you enter now, you will not be able to
access the computer the next time you turn it on.
If you want to return to the password submenu without
saving any changes, press
4. After you enter a password, press
password submenu.
5. Highlight
server mode on or
The Setup program requires a power-on password to turn
network server mode on. If you did not enter a password,
this message appears:
Set a power-on password first
To enter a password, highlight
and follow steps 3 and 4 above.
6. After you enter a power-on password and turn network
server mode on or off, highlight
SETTINGS
Setup menu.
2-10 Running the Setup Program
key when you use your password to
SHIFT
Network server mode. To turn network
off,
* * * * and press
SHIFT
E .
SC
Enter
press
Enter.
Power-on password
* * * * SAVE
Enter
key, such as $,
to return to the
to return to the main