Epson Equity 386SX User Manual page 166

2. Insert the working copy of your Reference diskette into
drive A.
3. If necessary, type
4. At the
A>
following messages appear:
This program will configure the
system to work with the SMART
utility when installing the
RampagePlus
SMART can only be executed
immediately after this
configuration program.
Continue ? (Y/N)
5. To configure your computer for use with RampagePlus 286,
press Y. (If you want to exit to MS-DOS without
configuring your computer, press
the MS-DOS
Configuration completed. The SMART
installation utility
used.
6. Use the SMART setup program now. See your
RampagePlus 286 manual for instructions.
You can also execute CORFIX from your hard disk if you
copied the CORFIX utility from the Reference diskette to
your hard disk.
Installing Options
5-24
and press
A:
prompt, type
CORFIX
286.
prompt and this message:
A>
to log onto drive A.
Enter
and press
Enter.
If you press Y, you see
N.)
may now
The
be
--