Epson Equity 386SX User Manual page 203

Before checking the operation of the keys, you must identify
your keyboard layout so the test is appropriate for the keys on
your keyboard. A display appears, asking you to identify the
shape of your
Enter
one on your keyboard, then press
The program displays your keyboard layout on the screen.
When you press a key on the keyboard, an asterisk appears at
the corresponding location on the keyboard
a key down, the asterisk begins to blink. If an asterisk does not
appear at the correct location, there is a problem with your
keyboard. Test each key.
You see these messages on the screen:
Press ESC followed by ENTER to exit.
Press END followed by ENTER if screen
and keyboard do not match.
If all the keys function correctly and match the characters
displayed, press
E
If all the keys function, but the characters displayed do not
match the keys, press
keyboard test from the Device List, and check that you selected
the correct keyboard layout. You can find diagrams of all the
international keyboard layouts in the MS-DOS Reference
Manual.
If any key is incorrect, press
error code and message, or print them out, and contact your
Epson dealer or service center.
key. Choose the shape that matches the
Enter.
and then
Enter.
SC
and then
E
SC
and
End
Performing System Diagnostics
If you hold
layout.
Then reselect the
Enter.
Make a copy of the
Enter.
C-11