TRIGEM CW4D33E Operation Manual page 213

Disk Menu, "Diskette format" should be highlighted with the
bar cursor. Use the down arrow key to highlight "Random
Read/Write Test." Press < ENTER>. That causes the
Diskette format box to appear on the left side of the screen.
The box contains the following questions (fields) that must be
answered with appropriate responses. These are:
The response for the first field depends upon the response
given in the CMOS Setup screen. If the response entered by
the user at the CMOS Setup screen was "A," this field will
automatically display "A." If the response entered by the user
at the CMOS Setup screen was "B," this field will
automatically display "B." To change the response, enter the
appropriate value at the CMOS Setup screen. When you are
satisfied with the information entered for the first field. enter
"Y" at the "Proceed" field.
Entering "Y" causes two information boxes to appear: 1) a
message box on the left side of the screen, and 2) the Activity
box on the right side of the screen. The message box contains
the following message
Advanced ROM Diagnostics E-41