Backing Up Your Hard Disk; The Backup Command - TRIGEM CW4D33E Operation Manual

You have now completed organizing your hard disk and
installing the MS-DOS f'l i es into subdirectories. As you can see,
the files have been placed in subdirectories according to the
type of activity you will doing when using them. As you add
application programs to the hard disk, it is a good idea to
create subdirectories to store them in, so as to keep different
program groups separated.
For more information on directory and subdirectory
organization with MS-DOS, see your MS-DOS User's Guide.

Backing Up Your Hard Disk

It is highly recommended that you make back up copies of your
valuable hard disk files regularly. Because hard disk drives are
fragile, they can sometimes be damaged. It is also possible to
erase some or all hard disk files through the use of incorrect
FORMAT and COPY commands. Backing up your files is the
only way you can be sure that you don't lose information you
may have spent months or even years gathering.
Two external command programs on your MS-DOS install
diskette will help you back up your hard disk. The first,
BACKUP, will copy files from the hard disk onto diskettes.
The other, RESTORE, allows you to use the diskettes created
by the BACKUP program to reload the files back onto the
hard disk, if necessary. The following sections describe how to
use these two command programs.

The BACKUP Command

This command backs up one or more files from your hard disk
onto floppy diskettes. The diskettes must be formatted by the
MS-DOS FORMAT command. Do not use the /S switch when
Using Your Hard Disk
6-16