TRIGEM CW4D33E Operation Manual page 186

The Enter New Track # and Head # box will appear with the
current track # (Cyl.) value entered in the field to the right of
"Enter New Track #." Type in a new value (if desired) at the
blinking cursor, and press
"Enter New Head #." The program will not accept dual
entries. All values must not exceed the corresponding cylinder
and head values for the disk drive type entered at that field.
Using the up and down arrow keys, move the cursor bar until
"Delete add entry" is highlighted. Press
last entry in the Bad Track List box is highlighted. Use the up
and down arrow keys to highlight the entry you wish to delete.
After highlighting the desired entry you wish to delete, press
< ENTER
block cursor will once again highlight "Add an entry" in the
Bad Track Edit Menu. To add more entries, press <ENTER>.
Clear the Bad Track List
l
Using the up and down arrow keys, move the cursor bar until
"Clear bad trk list" is highlighted. To clear the list in the Bad
Track List box, press
When you are ready to save the information in the Bad Tracks
List box, press
the cursor returns to the "Start cylinder number" field in the
Hard Disk Format information box.
E-14 Advanced ROM Diagnostics
> to delete it. The entry box will disappear and the
< ENTER >.
<ENTER>.
< ENTER
>. Enter a new value at
The edit menu will disappear and
< ENTER >. The