TRIGEM CW4D33E Operation Manual page 119

Using the DIR command, run a directory to verify that you
have copied the MS-DOS install diskette.
Remove the MS-DOS install diskette from drive A and replace
it with the MS-DOS Select diskette into the DOS4
subdirectory on the hard disk by entering the command:
When the copying process is done, carefully enter the following
command :
This command will remove the COMMAND.COM file from
the DOS4 subdirectory. Since the file is available in your hard
disk root directory, it is not necessary to include it in the
DOS4 subdirectory. Later, as your hard disk gets filled up with
saved by deleting such duplicate files might become useful.
Repeat the copy procedure described above for the remaining
disks in the MS-DOS package.
Return to the root directory by entering:
Using Your Hard Disk
6-15