Connecting To Navien Boilers/Water Heaters; Connecting To A Single Boiler/Water Heater - Navien NaviLink Lite User Manual

Connecting to Navien Boilers/Water Heaters

You can remotely control and monitor boilers or water heaters by connecting them to the
NaviLink Lite communication port and setting parameters on the front panel of boilers or
water heaters.

Connecting to a single boiler/water heater

You can connect the NaviLink Lite and a boiler or water heater via the NaviLink Lite cable.
1
Connect the RS-485 connector of the NaviLink Lite cable to a communication channel
port.
2
Connect the 5-pin connector of the NaviLink Lite cable to the boiler or water heater.
18