Fcc Compliance Statement - TRIGEM CW3S20A Operation Manual

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from
l
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
l
help.
To meet FCC requirements, shielded cables and power cords are
required to connect the device to a personal computer or other Class
B certified device.
If you experience problems with radio and/or television reception
through the use of this product, the following booklet, published by
the FCC, may prove helpful:
How to identify and Resolve Radio-TV Interference Problems
(Stock No. 004-400-00398-5)
This booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402.
V