Connecting A Monitor - TRIGEM CW3S20A Operation Manual

Figure l-2. System Main Unit

Connecting a Monitor

3
The procedure you use to connect your monitor to the
computer depends on the type of monitor you have. If you
have a VGA monitor (or a multi-frequency monitor with an
analog connector), you can connect it to the computer's built-in
VGA port. See "Using the VGA interface" below. If you have
any other type of monitor, see "Using a Display Adapter Card"
below.
Using the VGA Interface
Follow these steps to connect your VGA monitor to the VGA
port on the computer:
1. Make sure your monitor is turned off.
Setting Up Your System
l-4