Epson ActionTower 8000 User Manual page 48

Green PC options (continued)
Option
ISA or PCI Master
Activity
PM monitor
IRQ1 -IRQ15 Activity
cause errors in some applications. If you have problems, you may want to
disablethe Hard Disk Standby Timer option (Disabled is the
default setting).
(2) APM enhances your system's power-saving abilities by providing
increased inactivity detection and lower CPU power states without
degrading performance. Windows may provide a Power icon in the
Control Panel that lets you select the type of APM you want to use: see
the Windows on-line help information about the Power functions.
(3) If you enabled
active, the system does not enter any power-saving modes. If you disable
Access Detection, the system ignores video activity (such as a
VGA
blinking cursor) and enters these modes as necessary.
When you leave SETUP, you can save your settings or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
Settings
Enabled *
Disabled
On*
Off
Access Detection and your system's video is
VGA
Running SETUP and Installing Drivers
Description
Enables or disables checking of
activity from the devices listed
below: leave this option enabled
Allow you to enable or disable
checking of activity from devices
using IRQs 1 through 15 to
determine whether the system
enters a power-saving mode: the
device using each IRQ is listed on
the screen and varies depending
on your configuration
2 - 1 9