Using The Fixed Disk Setup Option - Epson ActionTower 8000 User Manual

System Setup options (continued)
Option
Keyboard
* Default setting
(1) If you installed a video adapter card, make sure you disable the
on-board SVGA controller by setting jumper JP2 to position 2-3; see
"Changing the Jumper Settings" in Chapter 4 for instructions.
(2) If the System
check that the SlMMs are installed correctly, as described in "Installing
Memory Modules (SIMMs)" in Chapter 4.

Using the Fixed Disk Setup Option

The Fixed Disk Setup
disk drives connected to the primary and secondary IDE
interfaces in your system. When you select this option, you see
the Fixed Disk Setup screen.
Note
These options do not configure other IDE devices, such as
CD-ROM drives, connected to the secondary IDE interface.
fixed Disk Setup screen options
Make sure the
DOS (the default setting). Set this option to
using UNIX
Windows.
Settings
Installed *
Not Installed
and Extended memory values are not correct,
memory
Large Disk Access Mode
®
or an operating system other than MS-DOS@ or
Running SETUP and lnstalling Drivers
Description
Enables or disables testing
of the keyboard during
power-on diagnostics:
select Not Installed if
you plan to use your system
without a keyboard (as a
network server, for
instance) so you do not
receive keyboard errors
option defines the types of hard
Other
option is set to
if you are
2-5