Using A Tripod - Epson PhotoPC 850Z User Manual

To avoid losing any images or settings, make sure the camera
has finished processing and is turned off before you connect
or disconnect the AC adapter. Then follow these steps:
1
Open the connector cover on the side of the camera.
2
Plug the adapter cable into the DC port on the camera.
3
Plug the AC adapter into an electrical outlet.

Using a Tripod

Follow these steps to use the camera with any standard tripod:
1
Assemble and set up the tripod according to the
manufacturer's instructions. Make sure the tripod is
well-balanced on a flat surface.
2
Find the opening for the tripod screw on the bottom of
your camera.
tripod screw opening
Carefully place the camera on the tripod. Screw the
camera on until it is firmly in place.
3
Adjust the tripod to view your subject as desired.
Optional Accessories A-3
A
A
B