Adjusting The Focus - Epson PhotoPC 850Z User Manual

NOTE
This View menu illustrates what you see if your user mode is
set to Full Auto . Your View menu will look different if the
user mode is set to Program or Manual .
2
Press the bottom left button (next to the current frame
setting).
For a few seconds, the word MACRO appears on the
LCD screen, and a green frame appears around the
previewed image. Also, the macro mode icon
in the lower left corner of the screen.
3
Press the shutter button halfway to lock the auto focus
and exposure. When the camera locks its settings, the
camera status light stops flashing and you see a green
circle on the screen. If you want, you can reframe
your picture while holding the button down.
4
Press the button all the way down to capture the image.
Macro mode remains active until you change it or turn off
the camera.
appears
NOTE
When you take macro close-ups, you should use a tripod (as
described in Appendix A) and disable the flash. Otherwise, your
pictures may appear blurry and washed out.

Adjusting the Focus

The PhotoPC 850Z lets you adjust the distance of the focal
point. Follow these steps:
1
Make sure that the camera is set to Manual user mode.
(See page 1-13 for details.)
Framing, Focusing, and Zooming 4-5
4
A
B