Using An Optional Tripod; Using Optional Lenses - Epson PhotoPC 700 User Manual

3
Plug the AC adapter into an electrical outlet.

Using an Optional Tripod

You can use your PhotoPC 700 with any standard tripod.
Follow these steps:
1
Assemble and set up the tripod by following the
manufacturer's instructions. Make sure the tripod is
well-balanced on a flat surface.
2
Find the opening for the tripod screw on the bottom of
your camera. Carefully place the camera on the tripod.
Screw the camera on until it is firmly in place.
3
Adjust the tripod to view your subject as desired.

Using Optional Lenses

The Tiffen lens adapter that comes with your camera lets you
attach wide-angle, telephoto, and other types of 37 mm
video camcorder lenses and filters.
The following table shows the minimum distance from the
subject, the diagonal angle of view, and the millimeter
equivalents for wide-angle, close-up, and telephoto lenses
from Tiffen:
Lens type Nearest subject
Standard 20 in.
Telephoto 7.5 ft
Wide angle (0.65X) 1.5 ft
+7 diopter close-up 2.5 in.
+10 diopter close-up 1.5 in.
Diagonal angle
Equivalent lens
of view
°
45 36 mm
°
30 76 mm
°
65 22.5 mm
Optional Accessories A-3
A
A
B