Reading Error Messages - Epson PhotoPC 850Z User Manual

6
Click the Upload button. You see a progress meter, and
after a moment PrintMark V2.0 appears in the
Applications in Camera listbox.
7
Click Close to exit.

Reading Error Messages

If you see an error message on the camera's LCD screen,
check the following table to respond to the message.
LCD screen messages
Message Description
No Photos in Memory. This message appears when there are no photos
in memory. Press the button next to OK to return
to the previous screen.
You can no longer You have selected the maximum number of
select an image. photos that the program will allow you to print.
No memory Card No memory card is installed in the camera, or the
Inserted. memory card is not fully inserted into its slot.
Insert a memory card as described on page 1-8.
Error! This message appears if the memory card is
Unable to access removed while using the Print Mark program.
DPOF file. (Never remove a memory card during any
operation, otherwise you may be unable to use
the photos in the card.) Turn off the camera and
re-insert the memory card.
15-8 Creating DPOF Files for Processing
LCD screen messages (Continued)
Message Description
Batteries are low. Use Battery power is almost out. If you have the
AC adapter. optional AC adapter, connect it to continue.
Otherwise, replace the batteries with batteries
that have been fully charged.
You lost last print There is already a DPOF file saved on the memory
settings. Are you card. If you create a new file, you overwrite the
sure? saved print settings.
DPOF file made by This message appears if the Print Mark program
other writer exists. tries to read a DPOF file made by a different
camera. Delete the file or create a new file.
Unable to save DPOF The memory card doesn't have enough space to
file. No memory space save a DPOF file. To create a DPOF file, delete
in card. any unnecessary photos and try again.