Toshiba B-FP3D-GH30-QM-R Owner's Manual page 5

Loading a Battery Pack
1. If the battery pack leaks liquid or gives out smoke or a bad smell, immediately stop using it and keep
it away from fire. Failure to do this may cause combustion or even an explosion.
2. In the United States, used lithium ion batteries should be returned to the store where you bought the
machine. (USA only)
3. LITHIUM ION BATTERIES MUST BE DISPOSED OF PROPERLY.
Caution: Do not handle any damaged batteries or any leaking lithium ions.
4. To avoid injury, be careful not to drop the battery pack on your feet.
Press the battery lever to open the battery cover and
insert the battery pack into the printer right up to the
end. The battery pack is locked in by the battery
cover. Be careful of the orientation of the battery
pack.
NOTE:
•
Be sure to use only the battery pack designed and
manufactured for use with the printer B-FP3D
series: B-FP803-BTH-QM-R
•
When unpacked, the battery level of the supplied
battery pack is not full. Therefore, charge the
battery pack with an optional battery charger or
load the battery pack in the printer and connect an
optional adapter before using it.
♦1-slot battery charger:
♦6-slot battery charger:
♦AC adapter:
♦Cigarette lighter adapter:
♦DC Jack plug adapter:
CAUTION!
DO NOT CONNECT any device other than the
above to the printer.
WARNING!
B-EP800-CHG-QM-R
B-EP800-CHG6-QM-R
B-FP800-AC-QM-S
B-EP802-DC12-QM-R
B-FP800-DCJA-QM-R
[B-FP3D Series]
5
Battery lever
Tab
Battery pack