Daily Maintenance - Toshiba B-FP3D-GH30-QM-R Owner's Manual

Daily Maintenance

To maintain the high quality and performance of the printer, regular cleaning is required.
CAUTION!
DO NOT USE a sharp object to clean the print head or various rollers, as this may cause a print failure or even
•
lead to the breakdown of the printer.
•
NEVER USE any volatile solvent including thinner and benzene, as this may cause a print failure or breakdown of
the printer.
•
Do not touch the print head element with your bare hands, as static electricity may damage the print head.
•
The print head becomes hot immediately after printing. Allow it to cool before performing any maintenance.
 Print head
Clean the print head element with a supplied print
head cleaner.
When linerless labels are used, wipe off the dirt of
residual glues from the print head each time one or
two media rolls are used up.
NOTE:
Be careful when working with the tear bar. Its edge
is sharp.
 Platen and peel-off shaft
While rotating the platen, clean it with a soft cloth
slightly moistened with absolute ethyl alcohol.
Clean the peel-off shaft with a soft cloth slightly
moistened with absolute ethyl alcohol
Clean the platen of the linerless label kit in the same
way. Cleaning should be performed each time one
or two media rolls are used up.
Print head element
Platen
11
Print head cleaner
Peel-off shaft