Battery - HP ENVY m4 Maintenance And Service Manual

Table of Contents

Advertisement

Battery

Description
6-cell, 62-Wh, 2.80-Ah battery
Before disassembling the computer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery release latch (1) to release the battery.
3.
Pivot the front edge of the battery (2) up and back.
4.
Remove the battery (3) from the computer.
To insert the battery:
1.
Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery
bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery
release latch will automatically lock into place.)
This manual downloaded from http://www.manualowl.com
Spare part number
671731-001
Component replacement procedures
31

Advertisement

Table of Contents
loading

Table of Contents