Controlling Multiple Projectors - Epson PowerLite 8300NL User Manual

Giving Your Presentation
48

Controlling Multiple Projectors

If you're using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, you have to set the remote control's ID to
match that of the projector. Or you can control all of the projectors
simultaneously by setting the remote control's ID to zero.
Setting the Projector ID
The projector's default ID is 1. If you need to change it, follow these
steps:
1. Press the button on the remote control.
Menu
You see the projector's menu screen.
2. Enter the
Advanced2
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
[ ESC ]: Retur [ ESC ]: Return
3. Press the right or left side of the
decrease the ID value.
4. Press to set the value.
Enter
5. When done, press
menu and highlight
:
Brightness Control High Low
: 1
Projector ID Setting
Network Setting
COM Port COM P : RS-232C
:
BNC Sync Termination mination
Color Temp. ON OFF
Reset
Execute
[ / ]: Select Select [ ]: Set Set
pointer button to increase or
to exit the menu system.
E
SC
.
Projector ID
USB
OFF RGB RGB
[Menu]: Exit