Dell Inspiron 14 7435 2-in-1 Owner's Manual page 78

Table 29. System setup options—Advance menu (continued)
Advanced
SATA/NVMe Operation mode
Adapter Warnings
Function Key Behavior
Keyboard Illumination
Keyboard Backlight with AC
Keyboard Backlight with Battery
Battery Health
External USB Ports
Enable Audio
Microphone
Camera
Secure Digital (SD) Card
Battery Charge Configuration
Advanced Battery Charge Configuration
78 BIOS setup
operating system, handles USB devices. USB emulation is
always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
By default, the USB Emulation option is enabled.
Allows you to configure the operating mode of the integrated
SATA/NVMe storage drive controller.
By default, the AHCI option is selected.
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
By default, the Adapter Warnings option is enabled.
Allows you to set function key or multimedia key as the
default function key behavior.
By default, the Multimedia key option is selected.
Selects the operating mode of the keyboard illumination
feature.
By default, the Bright option is selected.
Selects the timeout value for the keyboard backlight when an
AC adapter is plugged into the computer.
By default, the Keyboard Backlight with AC value is set to
1 minute.
Selects the timeout value for the keyboard backlight when
the computer is running on battery power. Default: 1 minute
By default, the Keyboard Backlight with Battery value is
set to 1 minute.
Displays the battery health.
Enables or disables the external USB ports.
By default, the External USB Ports are enabled.
Enables or disables the integrated audio controller..
By default, this option is enabled.
Enables or disables the microphone.
By default, the Microphone is enabled.
Enables or disables the camera.
By default, the Camera is enabled.
Enables or disables the SD card reader.
By default, this option is enabled.
Set the battery charge settings with a preselected custom
charge start and stop.
By default, the Adaptive option is selected.
Enable Advance Battery Charge Configuration from the
beginning of the day to a specified work period.