ECS Device Installation
5.
Install remaining fasteners and tighten.
4.7.3 Mounting the ECS-DUAL50WBD Board Only
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.
1.
Ensure AC and DC power have been removed from the panel.
2.
If this module is a replacement for an existing ECS-DUAL50W, remove the screws which secure the board to the enclosure.
46
24.75"
Figure 4.51 Cabinet Flush-Mount Dimensions and Mounting Hole Locations
14.5"
11"
mounting key holes
bottom mounting holes
ECS Series Manual — P/N 151455:H 2/15/2022
Installing the ECS-DUAL50W
board mounting bracket