ECS Device Installation
4.
Push the strain relief into the hole in the dead front panel.
5.
Connect microphone to Connector P2 on ECS-VCM Keypad. Refer to Figure 4.1 for location.
4.3 Installing the ECS-NVCM
This section provides information on the ECS-NVCM, Network Voice Control Module. The ECS-NVCM is compatible with the IFP-
2100ECS and ECS-300ECS FACPs.
For more information on how to install or remove the ECS-NVCM Network Voice Control Module, see installation sheet PN
LS10169-001SK-E.
4.3.1 ECS-NVCM Board Layout
The following is description of the ECS-NVCM voice control module components.
Network Connector P4
VBUS1
VBUS2
microphone
connector
18
Keypad Connector P3
Figure 4.10 Front View of ECS-NVCM
ECS-SW24 connector
Figure 4.11 Back View of ECS-EMG Keypad
ECS Series Manual — P/N 151455:H 2/15/2022
Installing the ECS-NVCM
AUX AUDIO
CMD1
COMMON
CMD2
PORT2
PORT1
ECS-NVCM
connector