Oem Softener System Setup - Excalibur EWS S130 Installation And User Manual

19
SOFTENER INSTALLATION AND USER GUIDE
2.7)

OEM Softener System Setup

Step 1S - Press NEXT and ▼ simultaneously for 5 seconds and
release. If screen in Step 2S does not appear, the lock on valve
programming has been activated. To unlock press ▼, NEXT, ▲,
REGEN in sequence, then press NEXT and ▼ simultaneously for 5
seconds and release.
Step 2S – Choose SOFTENING using ▲ or ▼. Press NEXT to go to
Step 3S. Press REGEN to exit OEM Softener System Setup.
Step 3S – Choose Downflow Brining Direction using ▲ or ▼. This
screen is not viewed when Step 2S is set to Filtering. Press NEXT to
go to Step 4S. Press REGEN to return to previous step.
Step 4S – Set Refill location using ▲ or ▼:
• "PoST" to refill the brine tank after the final rinse; or
• "PrE" to refill the brine tank four hours before the regeneration
time set.
This screen is not viewed when Step 2S is set to Filtering.
Press NEXT to go to Step 5S. Press REGEN to return to previous step.
Step 5S – Select the time for the first cycle using ▲ or ▼. Press
NEXT to go to Step 6S. Press REGEN to return to previous step.
BARRIE • ONTARIO • CANADA TF: 705.733.8900 WWW.EXCALIBURWATER.COM