Epson Stylus Pro GS6000 Quick Reference Manual page 4

Make sure the edges of the media are at least 0.2 inch (5 mm) away from the edges of the nearest clear
7.
rubber pressure roller.
Correct
0.2 inch
(5 mm)
To adjust the media's horizontal position, release the roll holder levers, move the media, and lock the
levers again.
If you loaded thick media, you may need to adjust the platen gap (head height) setting. Flip the blue
8.
head height adjustment lever up to the position shown. (Do not place the lever in any other position.)
Slide the paper holder plates over both
9.
edges of the media.
Caution: If the paper holder plates
interfere with printing, they may become
deformed and cause paper jams or
damage to the print head. If the plates
become damaged, stop using the printer
and contact Epson.
Move the paper lever to the
10.
position.
Close the front cover.
11.
Loading Media in the Epson Stylus
Incorrect
Pressure 0.2 inch
rollers (5 mm)
Highest position
Normal position
Secured
® Pro GS6000 |
3