Epson Stylus Pro GS6000 Quick Reference Manual page 23

| Paper Setup Option Summary
22
Option
PLATEN HEATER
POST HEATER
M/W ADJUSTMENT
(MicroWeave ® )
PAPER SUCTION
DRYING TIME
CARRIAGE MOVEMENT
PRINT MULTIPLE LAYER
Parameters
OFF
30°C to 50°C
(86 °F to 122 °F)
OFF
30°C to 50°C
(86 °F to 122 °F)
LOW A to B
MEDIUM A to D
HIGH A to D
EXTRA HIGH A to B
HIGH
LOW
0.0sec to 10.0sec
DATA WIDTH
PRINTER FULL WIDTH
OFF
2 to 8
Description
Sets the temperature of the heater beneath the print
head that warms the ink; see your media
instructions
Sets the temperature of the heater that dries the
printout; see your media instructions
Post Heater
Minimizes the affect of the MicroWeave adjustment
Prints areas between print head passes with a wave
form pattern
Prints like MEDIUM, but slower to improve print
quality
Prints like HIGH, but only on half of the print head
nozzles
Adjusts the suction pressure used when feeding the
media; see your media instructions
Selects a drying time for ink to avoid smearing
Moves the print head to the width of the print data
Moves the print head to the maximum width
Sets printing to overwrite lines a select number of
times (also called "multiple hit")
Platen Heater