Rammer Leg And Rammer Shoe - Husqvarna LT 5005 Workshop Manual

15. Install a new O-ring, the cover and the 4 screws.
16. Install the engine. Refer to
engine LT 5005, LT 6005, LT 6005 H on page 25
To remove and install the engine LT 8005 on
and
page 29 .
17. Install the handle unit. Refer to
install the handle unit LT 5005, LT 6005, LT 6005 H
on page 30 and To remove and install the handle
unit LT 8005 on page 34 .
18. Install the spring unit. Refer to
the spring unit LT 5005, LT 6005, LT 6005 H on
page 41 and To remove and install spring unit
LT 8005 on page 43 .
1726 - 001 -
To remove and install the
To remove and
To remove and install

7.8 Rammer leg and rammer shoe

7.8.1 To remove and install the spring unit
LT 5005, LT 6005, LT 6005 H
1. Remove the engine. Refer to
the engine LT 5005, LT 6005, LT 6005 H on page
25 .
2. Remove the 4 screws.
3. Turn the clutch counterclockwise until the crankshaft
is at its lowest position.
To remove and install
Repair and servicing - 41