5. Remove the handle unit.
6. Install in the opposite sequence.
7.6 Centrifugal clutch
7.6.1 To remove and install the centrifugal clutch
LT 5005, LT 6005, LT 6005 H
1. Remove the engine. Refer to
the engine LT 5005, LT 6005, LT 6005 H on page
25 .
2. Remove the 2 pins (A).
3. Remove the nut (B) from the engine shaft.
4. Remove the centrifugal clutch (C). If it is necessary,
use a puller.
1726 - 001 -
To remove and install
D
C
B
A
5. Install in the opposite sequence. Make sure that the
key (D) is installed before you install the centrifugal
clutch.
7.6.2 To remove and install the centrifugal clutch
LT 8005
1. Remove the engine. Refer to
the engine LT 8005 on page 29 .
2. Remove the bolt (A) and the washer (B) from the
engine shaft.
3. Remove the centrifugal clutch (C). If it is necessary,
use a puller.
4. Install in the opposite sequence. Make sure that the
key (D) is installed before you install the centrifugal
clutch.
7.7 Crankcase
7.7.1 To disassemble the crankcase
1. Remove the spring unit. Refer to
install the spring unit LT 5005, LT 6005, LT 6005 H
on page 41 and To remove and install spring unit
LT 8005 on page 43 .
2. Remove the handle unit. Refer to
install the handle unit LT 5005, LT 6005, LT 6005 H
on page 30 and To remove and install the handle
unit LT 8005 on page 34 .
3. Remove the engine. Refer to
the engine LT 5005, LT 6005, LT 6005 H on page 25
To remove and install the engine LT 8005 on
and
page 29 .
To remove and install
D
C
B
A
To remove and
To remove and
To remove and install
Repair and servicing - 35