Handle - Husqvarna LT 5005 Workshop Manual

5. Remove the 4 nuts and the engine.
6. Install in the opposite sequence. Clean the surfaces
between the flange and the crankcase before you
install the engine.
7.4.7 Starter
WARNING: Use protective glasses to prevent
injury to the eyes if the recoil spring ejects.
Refer to the operator's manual for the engine for more
information about the starter.
7.4.8 Valve clearance
WARNING: Let the engine become cool before
you examine or adjust the valve clearance.
Refer to the operator's manual for the engine for more
information about the starter.
30 - Repair and servicing

7.5 Handle

7.5.1 To remove and install the handle unit
LT 5005, LT 6005, LT 6005 H
1. Remove the 8 bolts and the bottom cover.
2. Remove the 12 bolts and the 2 side covers.
1726 - 001 -