Table of Contents
Advertisement
2.1 Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
2.2 General safety instructions
•
Read and obey this workshop manual.
•
Obey the local safety regulations when you repair or
do servicing of the product.
•
The safety equipment you use must obey local
regulations.
•
Use only the equipment that the manufacturer
recommends.
•
Use personal protective equipment.
•
Use protective gloves and safety glasses. The safety
glasses must obey the ANSI Z87.1 for US or EN166
for EU countries.
•
Use earmuffs when the product is in operation.
•
Always stop the product before you repair or do
servicing of the product.
•
Remove flammable materials from the work area.
The product can cause sparks.
•
Do not use the product if the power cord or cables
are damaged.
•
Disconnect the product from the mains socket.
•
If possible, keep the power cord disconnected when
you repair or do servicing of the product.
•
Use cables adapted to outdoor operation.
•
Do not touch the wires when the product is on. An
electrical shock can cause injury.
•
Do not point compressed air to your body.
Compressed air can go into the blood stream.
•
Always tighten the nuts and the bolts on the product
correctly.
•
Do not use the power cord to lift the product. Do not
pull the power cord to disconnect the product.
•
Do checks of the product for warning labels that are
damaged. Replace the warning labels that are
damaged.
•
Always read the warning labels of product supplies.
•
Obey the local waste regulations.
4 - Safety
2 Safety
2.3 Special safety instructions
•
When you use compressed air, do not point the
airflow in the direction of your body. Air can go into
the blood circulation and kill you.
•
Use eye protection when you do work on springs
that have tension.
•
Do not use accessories that are not approved by the
manufacturer. Do not do changes that are not
approved by the manufacturer. This can cause injury
or death to the operator or other persons.
•
Always use original spare parts and accessories.
•
Use approved hearing protection. Noise from the
product can result in permanent hearing loss.
2.4 Symbols on the product LT 5005, LT 6005,
LT 6005 H
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the manual carefully and make sure
that you understand the instructions
before you use the product.
Air filter indicator.
Use hearing protection.
Use protective boots.
The spring can eject and cause injury.
Hot surface.
Lift the product at this position on the
safety frame.
Operation position.
Start position / idle speed position.
1726 - 001 -
Hide quick links:
Advertisement
Table of Contents
