Windows System Requirements - Epson Stylus Scan 2500 User Manual

8
caution:
Using an improperly
shielded USB cable—
especially a cable more
than 6.5 feet (2 meters)
long—may cause the
EPSON Stylus Scan to
malfunction.
The EPSON Stylus Scan
cannot be used with a
switch box or a parallel
pass-through port (for
example, on a Zip
drive).
Notices
Check this chapter for system requirements, safety instructions,
and other important information about your EPSON Stylus
Scan 2500.

Windows System Requirements

®
An IBM compatible PC with at least a 486/66 MHz
processor (Pentium
Microsoft Windows 95 or 98
At least 16MB of RAM (32MB or more recommended)
At least 50MB of free hard disk space (100MB
recommended)
VGA or better display adapter and monitor (24-bit color
recommended)
Double-speed (2
x
software (quad-speed [4
Your system should have one of the following interfaces (USB
recommended):
An available USB port or hub connection on a computer
running Windows 98 with a Windows 98 compliant USB
port and a shielded USB "AB" interface cable up to 6.5 feet
(2 meters) long
An available parallel port with a high-speed, bidirectional,
IEEE-1284-compliant parallel cable up to 10 feet
(3 meters) long. The cable must have a D-SUB, 25-pin,
male connector for your computer and a 36-pin,
®
Centronics compatible connector for the EPSON
Stylus Scan
®
processor recommended)
) CD-ROM drive for installing the
] or faster recommended)
x
Notices
157