Description Of Parameters - Taie FA Series Operation Manual

9.2.2

Description of parameters

Set
Set
Set
Set
Set
Set
Display
If P1=0.0
Set
Set
Set
Set
Display
Set
If P2=0.0
Set
Set
Set
Return to "P1＂
LCK Levels entering available
Level 1
(User)
◎
◎
◎
◎
◎
◎
All manuals and user guides at all-guides.com
Range：0.0~200.0%
Proportional band 1
ON/OFF control if set to 0 (0.0)
(For output 1)
Range：0~3600 seconds
Integral time 1
(For output 1) PD control if set to 0
Derivative time 1
Range：0~900 seconds
(For output 1)
PI control if set to 0
Reserved Reserved
Auto tuning offset value Range：0~USPL
Range：0~150 seconds
Output 1 cycle time
Relay output : 10
Voltage pulse output : 1 , mA output: 0
Hysteresis for output 1
Range：0~1000
ON/OFF control
Proportional band 2
The same with P1
(For output 2)
Integral time 2
The same with I1
(For output 2)
Derivative time 2
The same with D1
(For output 2)
Output 2 Cycle time The same with CYT1
Hysteresis for output 2
The same with HYS1
ON/OFF control
Set point of output 1 (Heating side)
Control gap 1
=SV - GAP1
(For output 1)
Control gap 2
(For output 2)
=SV + GAP2
Function lock
Level 2 Level 3 Level 4
(PID) (Input) (SET)
◎ ◎
------
◎
------
◎
------
◎
------
◎
------
◎
27
Parameters which can be
changed
------ All parameters (default value)
All parameters
◎
------ All parameters except level 3
------ Parameters in level 1
------ "SV" and "LCK"
------ Only "LCK"