Changing Incoming Faxes Settings - Epson Aculaser CX21N Series User Manual

Note:
❏ Page numbers will not be printed when performing a manual transmission.
❏ Part of the document may be lost since the above information overwrites the document data.
Setting Note
On Prints the sender information
Off Does not print the sender information
1. Press the
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the d Down button twice to select Fax Settings, then press the r Right button.
The Fax Settings menu appears.
3. Press the d Down button to select Transmssn Settings, then press the r Right button.
4. Press the d Down button to select Print Sender Info, then press the r Right button.
5. Press the u Up or d Down button to select On, then press the r Right button.
6. To exit the settings, press the l Left button several times or another mode's button.

Changing incoming faxes settings

You can set the following items for receiving faxes in Reception Settings.
Reception Settings menu
Paper Cassette
Incoming Mode
Attached Phone Timeout
Fit to page
1. Press the
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the d Down button twice to select Fax Settings, then press the r Right button.
The Fax Settings menu appears.
Setup button on the control panel.
Setting items
Auto, MP, LC
Auto switching, Fax only,
Phone only, TAM
1 to 99
On, Off
Setup button on the control panel.
Faxing (Fax Model Only)
220