Auger Mark; Wrinkled/Stained Paper - Epson Aculaser C1700 Series User Manual

Auger Mark

Problem
The printed result has auger mark.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Wrinkled/Stained Paper

Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the Status tab in the Status Monitor window.
2. Replace the toner cartridges as necessary.
Start Developer Stir Mode.
1. Launch the Printer Setting Utility, and click Developer Stir Mode on the
Diagnosis tab.
2. Click the Start button.
Epson AcuLaser C1700 Series
Troubleshooting
User's Guide
89