Epson WorkForce Pro WP-4025 DW User Manual page 78

WP-4011/4015/4020/4025
Lights Problem and solution
Paper out
No paper is loaded.
No paper cassette
Paper cassette is not installed.
Wrong paper size fed
During automatic 2-sided printing, the paper size
fed into the printer is smaller than the selected
paper size.
Paper size selected does not match the paper size setting
The selected paper size does not match any of the
sizes set in the Paper Size Loaded setting.
Double-paper feed
Two sheets of paper are fed at the same time.
Paper jam
Paper has jammed in the printer.
Front cover open
The front cover is open.
User's Guide
Troubleshooting
Load paper into the rear MP tray or the paper
cassette, and then press the b button. The printer
resumes printing and the light goes out.
Install the paper cassette into the printer and
press the b button.
After loading paper that matches the print size
selected on the computer, press the b button to
clear the error, and then continue printing.
Reprint any missing pages.
After loading paper that matches the print size
selected with the computer, press the b button to
clear the error, and then change the Paper Size
Loaded setting to continue printing.
"Paper Size Loaded Setting" on page 71
&
Reprint any missing pages.
Press the b button to feed and eject the paper. If
the paper remains in the printer, see
Jams" on page 85.
Try the following solutions.
1. & "Removing jammed paper from the paper
cassette(s)" on page 87
2. & "Removing jammed paper from the rear
unit" on page 85
3. & "Removing jammed paper from the front
cover and the output tray" on page 86
4. Press the b button to clear the error.
Close the front cover.
78
"The Paper