Bar And Chain Combinations; Spare Parts And Accessories - Stihl MSA 160.0 C Instruction Manual

22 Bar and Chain Combinations

– Sound power level L
EN 62841-4-1: 93 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 3.9 m/s²
– Handlebar: 4.6 m/s²
MSA 220.0 C
– Sound pressure level L
to EN 62841‑4‑1: 91 dB(A)
– Sound power level L
EN 62841-4-1: 99 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 3.6 m/s²
– Handlebar: 4.8 m/s²
The sound and vibration levels indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
22 Bar and Chain Combinations
22.1 STIHL MSA 160.0 C, MSA 200.0 C, MSA 220.0 C Chainsaws
MSA 160.0 C, MSA 200.0 C
Pitch Drive link
gauge/groove
width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
MSA 220.0 C
Pitch Drive link
gauge/groove
width
3/8" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
23 Spare Parts and Accesso‐
ries
23.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
0458-024-9801-A
measured according to
wA
measured according
pA
measured according to
wA
Length Guide bar
25 cm
Rolloma‐
30 cm tic E Mini /
Light 01
35 cm
30 cm Carving
Length Guide bar
30 cm
35 cm
Rollomatic E /
Light 04
40 cm
45 cm
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
stress. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
tool is switched off and also when it is switched
on but running without any load.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
21.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of Number of
teeth, spro‐ drive links
cket nose
8
-
Number of Number of
teeth, spro‐ drive links
cket nose
9
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
English
Saw chain
56
64
71 PM3 (model
3670)
72
64
Saw chain
44
61 PMM3
50
(model 3610)
61 PS3 Pro
55
(model 3699)
61
59