Bar And Chain Combinations; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl MSA 161 T Instruction Manual

20 Bar and Chain Combinations

– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
19.5 Noise and Vibration Data
STIHL recommends that you wear hearing pro‐
tection.
– Sound pressure level L
to ISO 22868: 83 dB(A) K-value (uncertainty)
for noise pressure level is 2 dB(A).
– Sound power level L
ISO 22868: 94 dB(A) K-value (uncertainty) for
sound power level is 2 dB(A).
– Vibration level a measured according to
hv
ISO 22867
– Control handle: 2.2 m/s² K-value for vibra‐
tion level is 2 m/s².
– Handlebar: 2.1 m/s² K-value (uncertainty)
for vibration level is 2 m/s².
The vibration values quoted above have been
measured according to a standardized test pro‐
20 Bar and Chain Combinations
20.1 STIHL MSA 161 T Chainsaw
Pitch Drive link
gauge/groove
width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
21 Spare Parts and Accesso‐
ries
21.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
0458-791-9821-D
measured according
pA
measured according to
wA
Length Guide Bar
25 cm
Rollomatic E Mini
30 cm
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
19.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Nose spro‐ Number of
cket teeth drive links
8

22 Disposal

22.1 Disposing of Chainsaw and
Battery
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the saw, guide bar, saw chain, bat‐
tery, accessories and packaging in accord‐
ance with local regulations and environmental
requirements.
23 EC Declaration of Con‐
formity
23.1 STIHL MSA 161 T Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
English
Saw chain
57
71 PM3 (Type
3670)
65
45