Siemens ARCADIS Varic VB 13C Quick Manual page 78

Reports
(1)
(2)
(3)
(4)
78
A lithotripsy procedure is possible only
after a patient has been registered.
When you start an ESWL treatment, the
LithoReport editor is opened automatically
with the new report.
In the Viewing task card you can
open reports by clicking the rele-
vant button on the Reporting
subtask card.
In the STATUS area you can see the current
processing and verification status. You can
change these statuses only in the case of
postprocessing reports (according to the
work progress made).