The Firewall Advanced NAT page provides the ability to set up the con guration for Static and Dynamic NAT.
SNAT
Following actions are available for SNAT.
Click on
to add the Port Forward rule.
Click on to
edit a Port Forward rule.
Click on to
delete a Port Forward rule.
Refer to the below table when creating or editing a SNAT entry:
Name
IP Family
Protocol Type
Source IP Address
Network Address Translation
Specify a name for the SNAT entry
Select the IP version, two options are available: IPv4 or Any.
Select one of the protocols from dropdown list or All, available options are: UDP/TCP, UDP, TCP and All.
Set the Source IP address.
SNAT page