Table of Contents
Advertisement
Name
Enter a name for the PPTP client.
Connection Type
Select PPTP from the drop-down list.
Server
Enter the IP/Domain of the remote PPTP Server.
Enable / disable the MPPE for data encryption.
MPPE Encryption
By default, it's disabled.
Username
Enter the Username for authentication with the VPN Server.
Password
Enter the Password for authentication with the VPN Server.
Choose the interfaces.
Interface
Note:
remote device is allowed to access, please set the corresponding forwarding rules in rewall.
Choose to which destination group or WAN to allow tra c from the VPN, this will generate automatically a forwarding
Destination
rule under the menu
This feature is a form of network address translation (NAT) which allows internal computers with no known address
IP Masquerading
outside their network, to communicate to the outside. It allows one machine to act on behalf of other machines.
Con gures the remote subnet for the VPN.
Remote Subnet
The format should be "IP/Mask" where IP could be either IPv4 or IPv6 and mask is a number between 1 and 32.
example:
PPTP Client Con guration
Set forwarding rules in rewall automatically to allow tra c forwarded from VPN to the selected WAN port. If
Firewall
Tra c Rules
→
192.168.5.0/24
Forward.
→
Advertisement
Table of Contents
