Table of Contents
Advertisement
Tracking IP Address 1
Tracking IP Address 2
VLAN Tag
Multiple Public IP
Address
IPv6 Settings
○
GWN70xx routers also support IPv6 con guration.
Please refer to the following table for IPv6 settings:
IPv6
Check "ON" to activate IPv6
●
●
Connection Type
●
The default setting is "DHCPv6".
Static DNS
Check Static DNS then enter the Preferred DNS Server and the Alternative DNS Server.
Once enabled, relay IPv6 addresses to clients on the LAN side.
IPv6 Relay to VLAN
Note:
WAN Port Settings
○
Con gures tracking IP address of WAN port to determine whether the WAN port network is normal.
Add another alternative address for Tracking IP Address
Select if either to enable or disable VLAN Tag.
Please use with Port Forward function, so that you can access to router via public IP address.
DHCPv6 :
When selected, it will act as a DHCP client and acquire an IPv4 address automatically from the DHCP server.
Static IPv6 :
When selected, the user should set a
DNS
Server.
PPPoE (only when IPv4 PPPoE is enabled) :
This function will take effect only
WAN Settings
WAN – IPv6 Settings
WAN Settings
static IPv6
address,
can be only used if PPPoE IPv4 is already enabled.
"IPv6 Relay from
WAN" is enabled on VLAN.
IPv6 Settings
Pre x
Length,
default Gateway
and
Preferred
Advertisement
Table of Contents
