Camera Does Not Print - Olympus CAMEDIA C-211 Zoom Operating Instructions Manual

Camera Does Not Print

The camera does not eject the film at all, or the film stops before fully ejecting.
Press the PRINT button (
camera will eject either one or two film sheets.* Check carefully to see whether the
print results are as expected.
The film remains jammed even after the PRINT button was pressed a second time.
Replace the film pack. The camera will eject the jammed film together with the new
pack's cover sheet. (pp.34–37, 59)
The film is jammed in such a way that the film pack cannot be replaced.
Bring the camera in for service.
*If the film ejects only one sheet, the remaining film count (displayed on the monitor)
may no longer match the actual amount of film remaining in the pack.
CAUTION
• Do not try to forcibly pull out film that is stuck partially emerged from the print outlet.
Forcing the film may break the mechanism.
) again to eject the jammed film. If all goes well, the
Troubleshooting (continued)
199