Sequence Shooting - Olympus CAMEDIA C-211 Zoom Operating Instructions Manual

Sequence Shooting

This feature lets you take a sequence of up to 45 shots simply by holding down the
shutter release button. Sequence shooting is intended for use with rapidly moving
subjects. You can take a quick series of shots, then keep the ones you like and erase
the others.
For details about how to use the menu, see "Using the Shooting
menu" on page 113.
Select from menu...
[ OFF ]
[ ESP
[ ]
[ HQ ]
[ AUTO ]
WB
END CHANGE
Make the setting...
DRIVE
SINGLE
SEQUENCE
SET
BACK
If the setting is SEQUENCE, the following restrictions apply.
• The flash does not operate.
• To prevent blurring caused by camera movement, the camera will never use a shutter
speed slower than 1/30 second. This means that dark subjects may be
underexposed.
• It may take some time to write the image data to the card after shooting is finished.
(The processing gauge may remain on the monitor for a noticeable amount of time.)
Maximum 45 sequential shots
]
Select
the drive screen.
OK
to go to
SINGLE:
• The camera shoots once when you full-
press the shutter release button. (This is the
default.)
SEQUENCE:
• The camera shoots one shot after another
until you release the button or until it has
taken up to 45 shots. (The maximum
number of shots that can be taken varies
according to the recording mode and the
card's remaining picture capacity.)
6
119