Autoplay - Olympus CAMEDIA C-211 Zoom Operating Instructions Manual

Autoplay

This feature automatically cycles through the card's recorded stills one after another, in
the same order that they were taken. This is a convenient way to quickly review all of
the stills in the card.
You can start autoplay only when you are displaying a shot that was recorded as a still
image. This feature is not available if you are viewing a movie frame (if you see the
mark on the monitor).
For details about how to use the menu, see "Using the Playback
menu" on page 139.
Select from menu...
[ FAST
CHANGE
END
Select the operation...
SLOW
FAST
ENTER
BACK
To stop autoplay...
Press the MENU button (
images until you do this. (If the camera is powered by batteries only, however, it will
automatically stop autoplay and enter standby mode after about 30 minutes.)
140
]
Select
autoplay selection screen.
Select SLOW to display images for 15 seconds
each.
Select FAST to display images for 2 seconds
each.
OK
). Note that the camera will continue cycling through
to go to the