Deployed Devices Monitored Via Nms-500 Controller - Planet NMS-500 Quick Installation Manual

Enterprise-class universal network management controller

Hide thumbs Also See for NMS-500:

Table of Contents

3. Deployed Devices Monitored via NMS-500 Controller

The NMS-500 incorporated in a workstation or PC can monitor all the deployed

wired or wireless PoE industrial–grade network devices, such as managed switches,

media converters, routers, smart APs, VoIP phones, IP cameras, etc. compliant

with the MQTT Protocol, SNMP Protocol, ONVIF Protocol and PLANET Smart

Discovery utility.

Please regularly check PLANET website for the latest compatibility

list of managed devices.

Note

Follow the steps below to set up the device from the "Standalone device" mode

to the "Managed device" mode.

Step 1. Connect the devices, NMS-500 Controller and your computer, to the same

network.

PoE

Managed AP

192.168.1.x

PoE

IP Camera

192.168.1.x

Step 2. Switch/Router: Log in to the Switch's Web User Interface and enable

the SNMP, LLDP and NMS controller functions.

AP: Log in to the AP's Web User Interface to configure the AP to

"Managed AP". In support of SNMP AP, enable the SNMP function.

IP Cam: The ONVIF function is enabled by default. NMS controller can

discover PLANET IP camera directly.

Switch/Router

Managed PoE Switch

192.168.1.x

NMS-500

PC / Workstation with

Web Browser 192.168.1.x

Default IP

192.168.1.100

Table of Contents