Deployed Devices Monitored Via Nms-360 Controller - Planet NMS-360 Quick Installation Manual

3. Deployed Devices Monitored via NMS-360 Controller

Prior installation
The NMS-360 is used to centrally manage a large number of BSP-360s(V2).
Therefore, you need to upgrade the BSP-360(V2) firmware before using NMS-360.
Please download and use the latest BSP-360(V2) firmware from the website so
that setting can be completed smoothly.
The NMS-360 incorporated in a workstation or PC can monitor the BSP-360s
compliant with the MQTT Protocol, SNMP Protocol, ONVIF Protocol and PLANET
Smart Discovery utility.
Follow the steps below to set up the NMS-360 and BSP-360(V2) accordingly.
Step 1. Connect the devices, NMS-360 Controller and your computer, to the same
network.
Managed AP
192.168.1.x
PoE
PoE
IP Camera
192.168.1.x
Step 2. BSP-360: Log in to the Switch's Web User Interface and enable the SNMP
and NMS controller functions.

NMS-360
BSP-360
192.168.1.x Default IP: 192.168.1.100
PC / Workstation with
Web Browser 192.168.1.x

9